close
Warning:
Can't synchronize with repository "(default)" (/common/SVN/crkit does not appear to be a Subversion repository.). Look in the Trac log for more information.
- Timestamp:
-
Jul 14, 2010, 6:54:47 PM (14 years ago)
- Author:
-
khanhle
- Comment:
-
--
Legend:
- Unmodified
- Added
- Removed
- Modified
-
v4
|
v5
|
|
5 | 5 | Firmware : |
6 | 6 | 1. Multi-clock domain synchronization e.g. adc -> sys_clk, sys_clk -> dac, eth <-> sys_clk. Will need clock enable capability support. '''(done)''' |
7 | | 2. Add RMAP read ability (send ethernet frame with a RMAP read request, the response will be an ethernet going back to host) ''(NOT done)'' |
8 | | 3. Redesign RMAP to work with both ISE and MATLAB. ''(done)'' |
9 | | 4. Add 1Gbps Ethernet support ''(done)'' |
| 7 | 2. Add RMAP read ability (send ethernet frame with a RMAP read request, the response will be an ethernet going back to host) '''(NOT done)''' |
| 8 | 3. Redesign RMAP to work with both ISE and MATLAB. '''(done)''' |
| 9 | 4. Add 1Gbps Ethernet support '''(done)''' |
10 | 10 | 5. Add data frame segmentation ability for ethernet packets. Rx data may be larger than Ethernet frame size. Therefore, we will need |
11 | | to segment the data into multiple ethernet frames ''(NOT supported in R3)'' |
12 | | 6. Integrate Rx chain into MATLAB/Simulink environment ''(NOT done)'' |
13 | | 7. Update current build_fw, syn_fw and par_fw scripts to support dynamically allocated application modules ''(done, except syn_fw and par_fw scripts)'' |
14 | | 8. Revisit current SVN folder structure to support multiple apps ''(done)'' |
15 | | 9. Add modulator into Tx use apps e.g. muxing between SINE, AWGN and host data ''(NOT supported in R3)'' |
16 | | 10. Documentation : wiki, tutorials ''(work in progress)'' |
17 | | 11. Add support for Freebo and WDR e.g. RMAP, SPI read capabilities ''(done for SDR)'' |
| 11 | to segment the data into multiple ethernet frames '''(NOT supported in R3)''' |
| 12 | 6. Integrate Rx chain into MATLAB/Simulink environment '''(NOT done)''' |
| 13 | 7. Update current build_fw, syn_fw and par_fw scripts to support dynamically allocated application modules '''(done, except syn_fw and par_fw scripts)''' |
| 14 | 8. Revisit current SVN folder structure to support multiple apps '''(done)''' |
| 15 | 9. Add modulator into Tx use apps e.g. muxing between SINE, AWGN and host data '''(NOT supported in R3)''' |
| 16 | 10. Documentation : wiki, tutorials '''(work in progress)''' |
| 17 | 11. Add support for Freebo and WDR e.g. RMAP, SPI read capabilities '''(done for SDR)''' |
18 | 18 | |
19 | 19 | Software : |