wiki:crkit/Software/Firmware/ProjectPlanning/R2

R2

Main focus of R2 is to add spectrum sensing capabilities using Xilinx programmable FFT core, and port the design to MATLAB/Simulink environment. NOTE : only Transmit section of design has been integrated into MATLAB. The goal is to establish a baseline and understanding of MATLAB limitations for advanced HW designs.

The release contained the following updates :

Firmware :

  1. Added receiver structure e.g. adc if -> FFT -> averaging -> buffer -> eth_tx
  2. Programmable FFT core : 8, 16, 32, 64, 128, 256, 512, 1024-pt FFT
  3. Averaging capabilities with FFT : 2, 4, 8, 16, 32, 128, 256
  4. Integrated Tx design/libraries into MATLAB/Simulink environment e.g. 'push button' build process
  5. 100Mbps Ethernet Rx/Tx? is now supported

Note : only SDR is supported.

Software :

  1. ADD CONTENT

..

Last modified 7 years ago Last modified on 07/14/10 14:59:50